Kingway Gas Power Department
Kingway Gas Power Department has been committed to the research and development of gas engines, has developed the controller ECU suitable for different gas fuels, has completely independent intellectual property rights.
We can not only provide the whole gas engine, but also provide diesel engine modification service and design, manufacture and installation of the gas supply system (gas skid station).
With the strong technology, any type of diesel engine can be successfully convert into single fuel or dual fuel gas engine, there is no fundamental performance difference compared to the original machine, and can be customized according to the working and environmental conditions, so the actual use effect exceeds the original machine.
Always been our persistent pursuit goals
Single fuel generator set:
Single fuels include LPG, CNG, LNG, Biogas and other flammable gases.
We can customize the gas supply method of fuel (Single-point mixing or multi-point mixing injection) according to the actual needs of customers.
Dual-fuel generators can be used in combination with diesel and gas under normal conditions.
The blending substitution rate can reach 80%, and the average rate is 55%.
Can switch to single diesel fuel mode without gas fuel.
Note: Blending substitution rate %:
In the blended state, the proportion of gaseous fuel in the total fuel (gas + diesel).
* Gas engine protection (water temperature, oil pressure, oil temperature, overspeed, etc.);
* Gas engine inlet protection against fire returning, overpressure, and explosion & vibration protection;
* Emergency cut-off and fire arresting device for gas pipeline;
* Gas engine exhaust temperature control;
* Emergency shutdown of the genset;
1. Independently develop core control unit ECU of the gas engine.
* Single fuel ECU using thin combustion technology (single-point hybrid & multi-point hybrid)
The system integrates high-energy ignition and ignition angle control, and can be pre-installed with a explosion & vibration protection management system;
The system uses a wide-area line oxygen closed-loop system to dynamically monitor A / F in real time to reduce emissions;
The system integrates digital speed regulation, and the transient response time to control the gas injection valve is only 2ms;
* Dual fuel ECU,
Blending of various fuels such as diesel & LPG, diesel & NG, diesel & Biogas;
Digital speed control and ignition independent control system are adopted to fully ensure the reliability of dual fuel applications;
PLC programmable control makes the fuel conversion stable and fast;
The above system is equipped with an exhaust temperature adaptive system to avoid excessive gas combustion and achieve genset protection;
2. Diesel engine convert to gas engine
Use Converge to analyze the simulation model of the combustion chamber of the engine, and analyze the intake and exhaust models;
Recalibrating the supercharged engine to obtain different gas power..
Self-design gas engine supporting parts, gas high temperature resistant materials;
Self-design marine diesel engine convert to fan belt drive system for land-based genset;
Configure air intake system, overpressure and explosion-proof system for gas engine.
3. LPG genset & dual fuel gas genset
LPG generator set;
Establish a combustion model suitable for LPG through Converge analysis software;
In order to adapt the A / F control strategy of the LPG engine, optimize the design of the combustion chamber;
Multi-point mixed injection mode is adopted to achieve more accurate injection volume and effectively avoid the bursting and returning of fire.
Dedicated gas skid station for LPG system;
Dual fuel gas genset;
The dual-fuel ECU independently developed by the company has successfully realized precise and automatic fuel switching;
Multi-point mixed injection mode is adopted, with a substitution rate of 30% -80% and an average substitution rate of 55%;
The power of dual fuel is equivalent to that of the original machine, and higher cost performance is very obvious;
4.Extra large / super large gas genset
Adopt the company's self-developed pre-combustion combustion system to realize the secondary ignition of large-bore engines;
Adopt several group explosion & vibration control system with American technology + gas CAN bus ECU control;
Multiple gas safety protection systems (overpressure, explosion protection, gas leakage, etc.);
Remote network positioning monitoring system for engine dynamic parameters (providing 24h guarantee service);
5. Gas supply skid-mounted system for gas genset:
Establish a gas supply system with stable pressure, reliable performance and safety
Prerequisites for engine operation.
According to the needs of customers, we can design various skid-mounted stations for customers such as vaporization, decompression, desulfurization, dehydration, metering, odorization, and fast charging.
Biogas generator is a large container in which animal manure or specially grown crops (such as corn) can be anaerobic digested. If MSW is used as a source of methane, this will also reduce the amount of MSW added to landfills. Biogas production process. In theory, with fuel cells, biogas can be directly converted into electricity. However, this process requires very clean gases and expensive fuel cells. In most cases, biogas is used as fuel for internal combustion engines, which convert it into mechanical energy to drive generators to generate electricity. 40KVA-600KVA Natural Gas / LNG / LPG / Biogas Generator we produced always match to buyers demand with low price and high quality. Please contact us for more specification.